Cisco ASR 14000 Series Management Command Reference page 368

install label
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
install label
To add a label or description to a state associated with a rollback point, use the install label command
in EXEC or administration EXEC mode.
Syntax Description
point-id
description description Specifies a description for the specified rollback point.
label-name label
Defaults No default behavior or values
Command Modes
EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the install label command to put a label and description on an installation rollback point that can
be used to identify the rollback point in other commands. Commands that support the rollback label
include:
•
•
•
Labels and descriptions defined in administrative EXEC mode are visible only in administrative EXEC
mode. Labels and descriptions defined in EXEC mode for an SDR are visible only in EXEC mode.
The label can be a maximum of 15 characters which must adhere to the following rules:
•
•
Cisco ASR 14000 Series Router System Management Command Reference
SMR-366
install label point-id {description description | label-name label}
Installation point ID number.
Specifies a label for the specified rollback point.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
clear install rollback
install rollback
show install rollback
No white-space
Cannot include any of the following CLI keywords:
all
–
summary
–
brief
–
detail
–
verbose
–
– active
Software Package Management Commands on Cisco IOS XR Software
OL-17231-01