Cisco ASR 14000 Series Management Command Reference page 477

Object Tracking Commands in Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
object
To configure an object for tracking, use the object command in list tracking configuration mode. To
delete a previously configured track based on an object, use the no form of this command.
Syntax Description
object-name
not
Defaults No default behavior or values
Command Modes
List tracking configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
To delete a previously configured track based on whether an interface object is not up or down, use the
not keyword together with the object command in a list of tracked objects based on a Boolean
expression.
The object command can only be used for a track based on a Boolean expression.
Task ID Task ID
sysmgr
Examples
The following example shows how to configure an object, using the optional not keyword, in a tracked
list of objects based on a Boolean calculation:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# track connection100
RP/0/RP0/CPU0:router(config-track-list)# type list boolean and
RP/0/RP0/CPU0:router(config-track-list)# object obj3 not
OL-17231-01
object object-name [not]
no object object-name
Name of the object to be tracked.
(Optional) Deletes a preivously configured track based on whether an
interface object is not up or down.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
object
SMR-475