Cisco ASR 14000 Series Management Command Reference page 467

Object Tracking Commands in Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear type line-protocol state
To clear entry of type line protocol state as the basis for tracking an object, use the clear type
line-protocol command in track configuration mode.
Syntax Description
This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes Track configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
sysmgr
Examples
The following example shows how to use the clear type line-protocol state command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# track track12
RP/0/RP0/CPU0:router(config-track)# clear type line-protocol state
Related Commands Command
track
type line-protocol state
OL-17231-01
clear type line-protocol state
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Initiates or identifies a tracking process to track the status of an object; also
enters track configuration mode.
Configures tracking based on the line protocol state of an interface object.
Cisco ASR 14000 Series Router System Management Command Reference
clear type line-protocol state
SMR-465