Cisco ASR 14000 Series Management Command Reference page 126

end
end
To terminate a configuration session and return directly to EXEC or administration EXEC mode, use the
end command in any configuration mode.
Syntax Description
This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes Any configuration mode
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the end command to exit any configuration mode and return directly to EXEC or administration
EXEC mode. If you enter this command without committing the changes to the target configuration, you
are prompted to do so:
Uncommitted changes found, commit them before exiting(yes/no/cancel)?[cancel]:
•
•
•
Entering Ctrl-Z is functionally equivalent to entering the end command.
Note
Use the
mode without being prompted to commit changes and without saving changes to the target configuration.
Task ID Task ID
config-services
Cisco ASR 14000 Series Router System Management Command Reference
SMR-124
end
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Entering yes saves configuration changes to the running configuration file, exits the configuration
session, and returns the router to EXEC or administration EXEC mode.
If errors are found in the running configuration, the configuration session does not end. To view the
errors, enter the show configuration (config)
Entering no exits the configuration session and returns the router to EXEC or administration EXEC
mode without committing the configuration changes.
Entering cancel leaves the router in the current configuration session without exiting or committing
the configuration changes.
abort command to exit the configuration session and return to EXEC or administration EXEC
Operations
read, write
Configuration Management Commands on Cisco IOS XR Software
command with the failed keyword.
OL-17231-01