Cisco ASR 14000 Series Management Command Reference page 303

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot status command to obtain status information about an interface on
the SPA.
Task ID Task ID
root-lr
Examples The following example shows sample output for the show hw-module subslot status command with the
temperature-sensor option:
RP/0/RP1/CPU0:router# show hw-module subslot 0/2/CPU0 status temperature-sensor
SPA device temperature-sensor index 0 subindex 0 info:
DS1631 (0x0803c2e4) device status:
temperature = 0x1c80 (28.5 degree C)
SPA device temperature-sensor index 0 subindex 0 info:
DS1631 (0x08063bec) device status:
temperature = 0x1e00 (30.0 degree C)
Table 37
Table 37
Field
DS1631 (0x0803c2e4) device status
temperature = 0x1c80 (28.5 degree C)
Related Commands Command
show controllers
OL-17231-01
Operations
read
describes the significant fields shown in the display.
show hw-module subslot status Field Descriptions
Description
Displays the controller type and other information.
Cisco ASR 14000 Series Router System Management Command Reference
Description
Identifies the device whose temperature status is displayed.
Current temperature of the specified device, in hexadecimal
format and degrees celsius.
show hw-module subslot status
SMR-301