Cisco ASR 14000 Series Management Command Reference page 697

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
length
To set the number of lines that display at one time on the screen, use the length command in line template
configuration mode. To remove the length command from the configuration file and restore the system
to its default condition, use the no form of this command.
Syntax Description
lines
Defaults lines: 24 lines
Command Modes Line template configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the length command to modify the default length setting for the specified line template. The length
setting determines when the screen pauses during the display of multiple-screen output. Specifying a
value of 0 for the lines argument prevents the router from pausing between screens of output.
Task ID Task ID
tty-access
Examples The following example shows how to set the length of the default line template to 33 lines:
RP/0/RP0/CPU0:router(config)# line default
RP/0/RP0/CPU0:router(config-line)# length 33
Related Commands Command
terminal length
OL-17231-01
length lines
no length lines
Number of lines that displays on a screen. Range is from 0 through 512. 0
specifies no pausing. The default is 24 lines.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Sets the length of the display terminal for the current terminal session.
Cisco ASR 14000 Series Router System Management Command Reference
length
SMR-695