Cisco ASR 14000 Series Management Command Reference page 682

banner prompt-timeout
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
banner prompt-timeout
To create a banner that is displayed when there is a login authentication timeout, use the banner
prompt-timeout command in global configuration mode. To delete the prompt timeout banner, use the
no form of this command.
Syntax Description
delimiter
message
Defaults No banner is displayed when there is a login authentication timeout.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Follow this command with one or more blank spaces and the delimiting character (c). Then enter one or
more lines of text, terminating the message with the second occurrence of the delimiting character (c).
This prompt-timeout banner is displayed when there is a login authentication timeout at the username
and password prompt.
Task ID Task ID
tty-access
Examples The following example shows how to configure a prompt-timeout banner:
RP/0/RP0/CPU0:router(config)# banner prompt-timeout c
Enter TEXT message.
THIS IS A PROMPT TIMEOUT BANNER
c
Cisco ASR 14000 Series Router System Management Command Reference
SMR-680
banner prompt-timeout delimiter message delimiter
no banner prompt-timeout
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
End with the character 'c'.
Terminal Services Commands on Cisco IOS XR Software
Delimiting character is "c".
Message text. You can include tokens in the form $(token) in the
message text. Tokens are replaced with the corresponding
configuration variable.
OL-17231-01