Cisco ASR 14000 Series Management Command Reference page 371

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
install remove
To delete inactive packages from a storage device, use the install remove command in EXEC or
administration EXEC mode.
Administration EXEC Mode
EXEC Mode
Syntax Description
device:package
inactive
sdr OWNER
prompt-level {default |
none}
asynchronous
synchronous
test
Defaults The operation is performed in asynchronous mode: The install remove command runs in the
background, and the EXEC prompt is returned as soon as possible.
Command Modes EXEC
Administration EXEC
OL-17231-01
install remove [device:package] [device:package2 ... device:package32] [inactive] [sdr OWNER]
[prompt-level {default | none}] [asynchronous | synchronous] [test]
install remove [device:package] [device:package2 ... device:package32] [inactive] [prompt-level
{default | none}] [asynchronous | synchronous] [test]
(Optional) Device and package, expressed in concatenated form (for
example, disk0:asr14k-mgbl-3.7.1). For the device argument, the value
is a specified storage device, typically disk0:.
Note
(Optional) Removes all inactive non-committed packages from the boot
device (usually disk0).
(Optional. Administration EXEC mode only) Removes a package for a
specific secure domain router (SDR). The only SDR available is
OWNER, which refers to the entire Cisco ASR 14000 Series Router
router.
(Optional) Specifies when you are prompted for input during the
procedure.
(Optional) Performs the command in asynchronous mode. In
asynchronous mode, this command runs in the background, and the
EXEC prompt is returned as soon as possible. This is the default mode.
(Optional) Performs the command in synchronous mode. This mode
allows the installation process to finish before the prompt is returned.
(Optional) Verifies the effects of proposed operations without making
changes to the Cisco IOS XR software.
Multiple packages can be removed at the same time.
default—you are prompted only when input is required by the
•
operation.
none—you are never prompted.
•
Cisco ASR 14000 Series Router System Management Command Reference
install remove
SMR-369