Cisco ASR 14000 Series Management Command Reference page 470

clear type route reachability
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear type route reachability
To clear entry of type route reachability as the basis for tracking an object, use the clear type route
reachability command in track configuration mode.
Syntax Description
This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes Track configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
A tracked IP-route object is considered up and reachable when a routing-table entry exists for the route
and the route is not inaccessible.
Task ID Task ID
sysmgr
Examples The following example shows how to clear tracking for route reachability.
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# track track22
RP/0/RP0/CPU0:router(config-track)# clear type route reachability
Related Commands Command
track
type route reachability
Cisco ASR 14000 Series Router System Management Command Reference
SMR-468
clear type route reachability
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Initiates or identifies a tracking process to track the status of an object; also
enters track configuration mode.
Configures tracking based on whether or not a route is part of a particular
routing table.
Object Tracking Commands in Cisco IOS XR Software
OL-17231-01