Cisco ASR 14000 Series Management Command Reference page 261

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
hw-module boot override
To place the standby RP into ROM Monitor mode so that you can update the ROMMON software in a
single chassis system to a compatible ROM Monitor version, use the hw-module boot override
command in administration configuration mode. To remove an RP from ROM Monitor mode, use the no
form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
No default behavior or values
Command Modes Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the
information.
Task ID Task ID
root-system
root-lr
Examples
The following example shows how to boot the standby RP to upgrade its ROMMON software to a more
recent ROM Monitor version:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# configure
RP/0/RP0/CPU0:router(admin-config)# hw-module boot override
Related Commands Command
show platform
OL-17231-01
hw-module boot override
no hw-module boot override
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
show platform command to view a summary of the nodes in the router, including status
Operations
read, write
read, write
Description
Displays information and status for each node in the system.
Cisco ASR 14000 Series Router System Management Command Reference
hw-module boot override
SMR-259