Cisco ASR 14000 Series Management Command Reference page 169

Configuration Management Commands on Cisco IOS XR Software
RP/0/RP0/CPU0:router# show route ipv4
% No matching vrf found
When the default VRF for the session is set to none, the system default VRF routes are displayed. In the
following example, the default VRF is set to none (empty), and the show route command displays the
system default VRF information:
RP/0/RP0/CPU0:router# set default-vrf none
%% Default Virtual Routing/Forwarding is set to ''
RP/0/RP0/CPU0:router# show route ipv4
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
Gateway of last resort is 12.29.0.1 to network 0.0.0.0
S*
L
C
L
Related Commands Command
set default-afi
set default-safi
show default-afi-safi-vrf
OL-17231-01
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - ISIS, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, su - IS-IS summary null, * - candidate default
U - per-user static route, o - ODR, L - local
0.0.0.0/0 [1/0] via 12.29.0.1, 00:31:30
10.10.10.10/32 is directly connected, 3d02h, Loopback1
12.29.0.0/16 is directly connected, 00:31:30, MgmtEth0/0/CPU0/0
12.29.56.21/32 is directly connected, 00:31:30, MgmtEth0/0/CPU0/0
Description
Sets the default AFI settings for the current session.
Sets the default SAFI for the current session.
Displays the default AFI, SAFI, and VRF settings for the current session.
Cisco ASR 14000 Series Router System Management Command Reference
set default-vrf
SMR-167