Cisco ASR 14000 Series Management Command Reference page 685

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear line vty
To clear a virtual terminal line (vty) to an idle state, use the clear line vty command in EXEC mode.
Syntax Description line-number
Defaults No default behavior or values
Command Modes
EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show users command to determine the origin of the connection and which lines to clear. When
a line is cleared to an idle state, the user on the other end of the connection receives notice that the
connection was closed by a foreign host.
Task ID Task ID
tty-access
Examples The following example shows how to reset vty 3 to the idle state:
RP/0/RP0/CPU0:router# clear line vty 3
Related Commands Command
show users
OL-17231-01
clear line vty line-number
Line number in the range from 0 to 99.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
execute
Description
Displays information about the active lines on the networking device.
Cisco ASR 14000 Series Router System Management Command Reference
clear line vty
SMR-683