Cisco ASR 14000 Series Management Command Reference page 397

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show install inactive
To display the inactive packages on the designated secure domain router system controller (DSDRSC)
for one or more secure domain routers (SDRs), use the show install inactive command in EXEC or
administration EXEC mode.
Administration EXEC Mode
EXEC Mode
Syntax Description
summary
detail
verbose
sdr sdr-name
location node-id
Defaults No default behavior or values
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show install inactive command to display the inactive packages for the DSDRSC.
Use the show version, show install active, or show install committed command to determine the device
Note
used as the boot device.
Enter the command in administration EXEC mode to display information for the DSDRSC in all SDRs.
OL-17231-01
show install inactive [detail | summary | verbose] [sdr sdr-name | location node-id]
show install inactive [detail | summary | verbose] [location node-id]
(Optional) Displays a summary of inactive packages.
(Optional) Displays summary and component information for inactive
packages.
(Optional) Displays summary, component, and file information for inactive
packages.
(Optional. Administration EXEC mode only.) Displays the inactive
packages for a the boot device in a specific secure domain router (SDR).
The sdr-name argument is the name assigned to the SDR.
(Optional) Displays the inactive software set from a designated node. The
node-id argument is expressed in rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Cisco ASR 14000 Series Router System Management Command Reference
show install inactive
SMR-395