Cisco ASR 14000 Series Management Command Reference page 569

Process and Memory Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show placement reoptimize
To display the predicted changes to reoptimize the placement of processes, use the show placement
reoptimize command in EXEC mode.
Syntax Description
program
program
instance
program-instance
all
Defaults
The default is to display predicted changes for all for all route processor (RP) and distributed route
processor (DRP) nodes and processes.
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show placement reoptimize command to display the predicted changes that will occur when
the
Task ID Task ID
sysmgr
Examples
The following example is of the show placement reoptimize command, entered without keywords or
arguments:
RP/0/RP0/CPU0:router# show placement reoptimize
Predicted changes to the placement
Program
--------------------------------------------------------------------------------
ipv4_rib
ipv6_rib
brib instance 81
bgp instance 1
OL-17231-01
show placement reoptimize [program {program instance program-instance | all}]
(Optional) Displays changes for a particular program.
A specific program or program group.
A specific program within a program group.
Displays changes for all programs.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
placement reoptimize command is run.
Operations
read
Current location
0/7/CPU1 (1/14/CPU1)
0/7/CPU1 (1/14/CPU1)
0/7/CPU1 (1/14/CPU1)
0/7/CPU1 (1/14/CPU1)
Cisco ASR 14000 Series Router System Management Command Reference
show placement reoptimize
New location
1/RP0/CPU0 (1/RP1/CPU0)
1/RP0/CPU0 (1/RP1/CPU0)
1/RP0/CPU0 (1/RP1/CPU0)
1/RP0/CPU0 (1/RP1/CPU0)
SMR-567