Cisco ASR 14000 Series Management Command Reference page 485

Object Tracking Commands in Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
type line-protocol state
To configure tracking of the line protocol state of an interface object, use the type line-protocol
command in track configuration mode. To delete the configuration of line-protocol tracking, use the no
form of this command.
Defaults
No default behavior or values
Command Modes Track configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The type line-protocol state command can be used in conjunction with the delay command to configure
the delay, in seconds, before the track or interface state should be polled for a change in its status.
The type line-protocol state command enters line-protocol tracking configuration mode.
Task ID Task ID
sysmgr
Examples
The following example shows how to use the type line-protocol state command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# track track12
RP/0/RP0/CPU0:router(config-track)# type line-protocol state
Related Commands Command
clear type
line-protocol state
delay
interface (track)
OL-17231-01
type line-protocol state
no type line-protocol state
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Clears entry of the line protocol state as the basis for tracking.
Configures the duration, in seconds, before the track or interface state
should be polled for a change in status.
Indicates an interface object type for tracking purposes.
Cisco ASR 14000 Series Router System Management Command Reference
type line-protocol state
SMR-483