Cisco ASR 14000 Series Management Command Reference page 691

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
disconnect-character
To define a character to disconnect a session, use the disconnect-character command in line template
configuration mode. To remove the disconnect-character command from the configuration file and
restore the system to its default condition, use the no form of this command.
Syntax Description
number
character
Defaults No disconnect character is defined.
Command Modes Line template configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The break character is represented by 0; null cannot be represented. Refer to the "ASCII Character Set
and Hex Values" appendix for a list of ASCII characters.
Task ID Task ID
tty-access
Examples The following example shows how to set the disconnect character for the default line template to the Esc
character, which is the ASCII decimal equivalent 27:
RP/0/RP0/CPU0:router(config)# line default
RP/0/RP0/CPU0:router(config-line)# disconnect-character 27
Related Commands Command
escape-character
OL-17231-01
disconnect-character [number | character]
no disconnect-character
(Optional) ASCII decimal equivalent of the disconnect character. Range is
from 0 through 255.
(Optional) Disconnect character.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Defines an escape character.
Cisco ASR 14000 Series Router System Management Command Reference
disconnect-character
SMR-689