Cisco ASR 14000 Series Management Command Reference page 366

install deactivate
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Install operation 14 'install deactivate disk0:asr14k-mpls-3.7.1 synchronous'
started by user 'user_b' at 18:38:37 UTC Sat Apr 08 2006.
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Install operation 14 completed successfully at 18:39:20 UTC Sat Apr 08 2006.
In the following example, the Security package is deactivated for the SDR named "LR1":
RP/0/RP0/CPU0:router(admin)# install deactivate disk0:asr14k-k9sec-3.7.1 sdr LR1
Install operation 11 'install deactivate disk0:asr14k-k9sec-3.7.1 on SDR: LR1'
started by user 'user_b' at 03:25:26 est Thu Mar 02 2006.
- 1% complete: The operation can still be aborted (ctrl-c for options)
The install operation will continue asynchronously.
The changes made to software configurations will
not be persistent
Info:
Info:
Info:
Info:
Info:
Info:
The currently active software is not committed. If the system reboots then the committed
software will be used. Use 'install commit' to commit the active software.
Install operation 11 completed successfully at 03:25:56 est Thu Mar 02 2006.
You cannot deactivate a package if other packages or nodes require that package. In the following
example, an attempt to deactivate a package is rejected:
RP/0/RP1/CPU0:router(admin)# install deactivate disk0:asr14k-diags-3.7.90 location
0/6/cpu0
Install operation 25 'install deactivate disk0:asr14k-diags-3.7.90 on node
0/6/CPU0' started by user 'user_b' at 23:01:38 UTC Sat Apr 15 2006.
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Error:
Install operation 25 failed at 23:01:44 UTC Sat Apr 15 2006.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-364
The changes made to software configurations will not be persistent
across system reloads. Use the command 'admin install commit' to make
changes persistent.
Please verify that the system is consistent following the software
change using the following commands:
show system verify
install verify
across system reloads. Use the command 'admin install commit' to make
changes persistent.
Please verify that the system is consistent following the software
change using the following commands:
show system verify
install verify
Cannot proceed with the deactivation because of the following package
incompatibilities:
asr14k-diags-3.7.90 on nodes of type RP needs asr14k-diags-3.7.90, or
equivalent, to be active on node 0/6/CPU0 on secure domain router
Owner.
asr14k-diags-3.7.90 on nodes of type SP needs asr14k-diags-3.7.90, or
equivalent, to be active on node 0/6/CPU0 on secure domain router
Owner.
asr14k-diags-3.7.90 on nodes of type LC needs asr14k-diags-3.7.90, or
equivalent, to be active on node 0/6/CPU0 on secure domain router
Owner.
Suggested steps to resolve this:
- check the installation instructions.
- activate or deactivate the specified packages on the specified
nodes.
Software Package Management Commands on Cisco IOS XR Software
OL-17231-01