Cisco ASR 14000 Series Management Command Reference page 584

Router system
Hide thumbs Also See for ASR 14000 Series:
Table of Contents

Advertisement

show snmp
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
24 Response PDUs
13 Trap PDUs
SNMP logging: enabled
Logging to 172.25.58.33.162, 0/10, 13 sent, 0 dropped.
Table 74
Table 74
Field
Chassis
SNMP packets input
Bad SNMP version errors
Unknown community name
Illegal operation for
community name supplied
Encoding errors
Number of requested
variables
Number of altered variables
Get-request PDUs
Get-next PDUs
Set-request PDUs
SNMP packets output
Too big errors
Maximum packet size
No such name errors
Bad values errors
General errors
Response PDUs
Trap PDUs
SNMP logging
sent
dropped
Cisco ASR 14000 Series Router System Management Command Reference
SMR-582
describes the significant fields shown in the display.
show snmp Field Descriptions
Description
Chassis ID string.
Total number of SNMP packets input.
Number of packets with an invalid SNMP version.
Number of SNMP packets with an unknown community name.
Number of packets requesting an operation not allowed for that
community.
Number of SNMP packets that were improperly encoded.
Number of variables requested by SNMP managers.
Number of variables altered by SNMP managers.
Number of get requests received
Number of get-next requests received.
Number of set requests received.
Total number of SNMP packets sent by the device.
Number of SNMP packets that were larger than the maximum packet
size.
Maximum size of SNMP packets.
Number of SNMP requests that specified a MIB object that does not
exist.
Number of SNMP set requests that specified an invalid value for a
MIB object.
Number of SNMP set requests that failed due to some other error. (It
is not a noSuchName error, badValue error, or any of the other specific
errors.)
Number of responses sent in reply to requests.
Number of SNMP traps sent.
Enabled or disabled logging.
Number of traps sent.
Number of traps dropped. Traps are dropped when the trap queue for
a destination exceeds the maximum length of the queue, as set by the
snmp-server queue-length command.
SNMP Server Commands on Cisco IOS XR Software
OL-17231-01

Advertisement

Table of Contents
loading

Table of Contents