Cisco ASR 14000 Series Management Command Reference page 599

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server chassis-id
To provide a message line identifying the Simple Network Management Protocol (SNMP) server serial
number, use the snmp-server chassis-id command in global configuration mode. To restore the default
value, if any, use the no form of this command.
Syntax Description
serial-number
Defaults On hardware platforms, where the serial number can be device read, the default is the serial number.
For example, some Cisco devices have default chassis ID values of their serial numbers.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the snmp-server chassis-id command to provide a message line identifying the SNMP server serial
number.
The chassis ID message can be displayed with the show snmp command.
Task ID Task ID
snmp
Examples
The following example shows how to specify the chassis serial number 1234456:
RP/0/RP0/CPU0:Router(config)# snmp-server chassis-id 1234456
Related Commands Command
show snmp
OL-17231-01
snmp-server chassis-id serial-number
no snmp-server chassis-id
Unique identification string to identify the chassis serial number.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Displays the status of SNMP communications.
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server chassis-id
SMR-597