Cisco ASR 14000 Series Management Command Reference page 266

hw-module power
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
hw-module power
To power on a specified line card or disable the node power-on feature, use the hw-module power
command in administration configuration mode. To power off a line card, use the no form of this
command.
Syntax Description
disable
location node-id
Defaults Power is on for all nodes.
Command Modes Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The hw-module power command is available for line cards only; it is not available for router processor
(RP) cards.
Use the
information.
Task ID Task ID
root-system
root-lr
Examples
The following example shows how to power on a line card:
RP/0/RP0/CPU0:router # admin
RP/0/RP0/CPU0:router(admin)# configure
RP/0/RP0/CPU0:router(admin-config)# hw-module power location 0/1/0
The following example shows how to disable the power-on feature for a line card:
RP/0/RP0/CPU0:router # admin
Cisco ASR 14000 Series Router System Management Command Reference
SMR-264
hw-module power [disable] location node-id
no hw-module power [disable] location node-id
(Optional) Disables the power state
Identifies the node you want to power on, or whose node power-on feature
you want to disable. The node-id argument is expressed in the
rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
show platform command to view a summary of the nodes in the router, including status
Operations
read, write
read, write
Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
OL-17231-01