Cisco ASR 14000 Series Management Command Reference page 17

Boot Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Enter the command config-register value to set the configuration register setting for the DSC.
The most commonly used configuration register settings are described in
Table 5
Value
0x0
0x2
0x102
0x40
Task ID Task ID
root-lr
Examples
The following example shows how to set the configuration register on the DSC to 0x2. Setting the
configuration registration to 0x2 causes the router to boot the Cisco IOS XR software and enter EXEC
mode during a router reload.
RP/0/RP0/CPU0:router(admin)# config-register 0x2
Successfully set config-register to 0x2 on node 0/RP0/CPU0
Successfully set config-register to 0x2 on node 0/RP1/CPU0
Related Commands Command
reload
show variables boot
show version
OL-17231-01
Common Configuration Register Settings
Description
RP enters ROMMON mode (
RP loads the Cisco IOS XR software and default configuration on the
next system boot. After logging in, the user can access EXEC mode.
Router loads the Cisco IOS XR software with the console break key
disabled on the next system boot.
Router enters the password recovery mode on the next system boot.
Operations
read, write
Description
Performs a reload of the route processor.
Displays the configuration register setting and boot file setting for the
RPs in the system.
Displays information about the Cisco IOS XR software.
Cisco ASR 14000 Series Router System Management Command Reference
Table 5.
) on the next system boot.
rommon B1>
config-register
SMR-13