Cisco ASR 14000 Series Management Command Reference page 462

clear delay
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear delay
To clear entry of a duration, in seconds, before the track or interface state should be polled for a change
in status, use the clear delay command in track configuration mode.
Syntax Description
delay up seconds
delay down seconds
Defaults
No default behavior or values
Command Modes Track configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
sysmgr
Examples The following example shows clearance of the configured delay, which had been set to notify the
network administrator of a change in the up state of the interface every five seconds:
RP/0/RP0/CPU0:router# configuration
RP/0/RP0/CPU0:router(config)# track atm1235
RP/0/RP0/CPU0:router(config-track)# clear delay up 5
Related Commands Command
delay
track
Cisco ASR 14000 Series Router System Management Command Reference
SMR-460
clear delay {up | down} [seconds]
Sets delay of from 1 to 10 seconds before communication of the up status
of the tracked object or list of objects.
Sets delay of from 1 to 10 seconds before communication of the down status
of the tracked object or list of objects.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Configures the duration, in seconds, before the track or interface state
should be polled for a change in status.
Initiates or identifies a tracking process to track the status of an object; also
enters track configuration mode.
Object Tracking Commands in Cisco IOS XR Software
OL-17231-01