Cisco ASR 14000 Series Management Command Reference page 474

interface (track)
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
interface (track)
To select an interface object type for tracking purposes, use the interface command in interface
configuration mode. To delete the configuration of a track based on a particular interface object type, use
the no form of this command.
Syntax Description
type
interface-instance
Defaults No default behavior or values
Command Modes Interface configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
To access this interface command, you must be in line protocol tracking configuration submode.
For information about interface keywords, see Cisco IOS XR Interface and Hardware Component
Command Reference.
Task ID Task ID
sysmgr
Examples The following example shows the interface command in the context of object tracking:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# track track12
RP/0/RP0/CPU0:router(config-track)# type line-protocol state
RP/0/RP0/CPU0:router(config-track-line-prot)#interface atm 0/2/0/0.1
Cisco ASR 14000 Series Router System Management Command Reference
SMR-472
interface type interface-instance
no interface type interface-instance
Interface type. For more information, use the question mark (?) online help
function.
Identifies a physical interface or a virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Use the show interfaces command to see a list of all possible
interfaces currently configured on the router.
Object Tracking Commands in Cisco IOS XR Software
OL-17231-01