Cisco ASR 14000 Series Management Command Reference page 21

Boot Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
mirror resume
To resume disk mirroring on a node after it has been temporarily stopped, use the mirror resume
command in EXEC or administration EXEC mode.
Syntax Description
location {node-id | all}
Defaults
If no node is specified, disk mirroring is enabled on the active RP.
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The mirror resume command resumes the mirroring of the primary boot device after it has been
temporarily paused with the mirror pause command.
The mirror resume command has no affect if the mirror configuration command is not enabled and the
mirror pause command has not been used.
Task ID Task ID
root-lr
Examples The following example shows how to resume disk mirroring on the active RP:
RP/0/RP0/CPU0:router# mirror resume
Related Commands Command
mirror
mirror pause
OL-17231-01
mirror resume [location {node-id | all}]
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Specifies the RP node in a multishelf system. The all keyword
specifies all RP nodes.
Description
Configures disk mirroring on a node.
Temporarily pauses disk mirroring on a node.
Cisco ASR 14000 Series Router System Management Command Reference
mirror resume
SMR-17