Cisco ASR 14000 Series Management Command Reference page 452

show ntp status
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show ntp status
To display the status of Network Time Protocol (NTP), use the show ntp status command in EXEC
mode.
Syntax Description
location node-id
Defaults
No defaults behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
ip-services
Examples
The following is sample output from the show ntp status command:
RP/0/RP0/CPU0:router# show ntp status location 0/2/cpu0
Clock is synchronized, stratum 4, reference is DLRSC node
nominal freq is 1000.0000 Hz, actual freq is 999.9801 Hz, precision is 2**26
reference time is C4143841.3403218C (18:17:37.203 UTC Tue Mar 30 2004)
clock offset is -11.9957 msec, root delay is 11.41 msec
root dispersion is 65.94 msec, peer dispersion is 0.00 msec
Table 54
Table 54
Field
synchronized
stratum
reference
Cisco ASR 14000 Series Router System Management Command Reference
SMR-450
show ntp status [location node-id]
(Optional) Displays the status of NTP from the designated node. The
node-id argument is entered in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
describes the significant fields shown in the display.
show ntp status Field Descriptions
Description
Synchronized system to an NTP peer.
NTP stratum of this system.
Address of the peer to which clock is synchronized.
NTP Commands on Cisco IOS XR Software
OL-17231-01