Cisco ASR 14000 Series Management Command Reference page 690

disconnect
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
disconnect
To disconnect a network connection, use the disconnect command in EXEC mode.
Syntax Description connection-number
network-name
EXEC
Defaults Disconnects the existing network connection if no arguments are provided.
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Do not disconnect a line to end a session. Instead, log off the host before ending the session to clear the
connection. If you cannot log out of an active session, disconnect the line.
Task ID Task ID
tty-access
Examples
The following example shows how to disconnect from a device (in this example User1) to return to the
router:
User1% disconnect
Connection closed by remote host
RP/0/RP0/CPU0:router#
Cisco ASR 14000 Series Router System Management Command Reference
SMR-688
disconnect [connection-number | network-name]
(Optional) Number of the line of the active network connection to be
disconnected. Range is from 1 to 20.
(Optional) Name of the active network connection to be disconnected.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Terminal Services Commands on Cisco IOS XR Software
OL-17231-01