Cisco ASR 14000 Series Management Command Reference page 80

clock summer-time
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clock summer-time
To configure the system to switch automatically to summer time (daylight saving time), use the clock
summer-time command in global configuration mode. To remove the clock summer-time setting, use
the no form of this command.
Syntax Description zone
recurring
week
day
month
hh:mm
offset
date
date
year
Defaults
Summer time is not configured.
offset: 60 minutes
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Cisco ASR 14000 Series Router System Management Command Reference
SMR-78
clock summer-time zone {recurring week day month hh:mm week day month hh:mm [offset] | date
{date month year hh:mm date month year hh:mm | month date year hh:mm month date year
hh:mm} [offset]}
no clock summer-time
Name of the time zone (for example, PDT) to be displayed when summer
time is in effect.
for the zone argument.
Indicates that summer time should start and end on the corresponding
specified days every year.
Week of the month (values are 1 to 5, first or last).
Day of the week.
Month.
Time (24-hour format) in hours and minutes.
(Optional) Number of minutes to add during summer time. The default is 60
minutes (1 hour).
Indicates that summer time should start on the first specific date listed in the
command and end on the second specific date in the command.
Date of the month.
Year (no abbreviation).
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Clock Commands on Cisco IOS XR Software
Table 14 on page 80 lists common time zone acronyms used
OL-17231-01