Cisco ASR 14000 Series Management Command Reference page 196

show configuration inconsistency replica
show configuration inconsistency replica
To display any configuration inconsistencies on a replica node, use the show configuration
inconsistency replica command in EXEC or administration EXEC mode.
Syntax Description
location node-id
Defaults
Administration EXEC mode: Displays configuration inconsistencies for the admin plane configuration.
EXEC mode: Displays configuration inconsistencies for an SDR configuration.
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
In administration EXEC mode, the replica node for the show configuration inconsistency replica
command is the standby designated system controller (DSC). In EXEC mode, the replica nodes are the
route processors (RPs) or distributed route processors (DRPs) that can become the designated secure
domain router system controller (DSDRSC).
Use the show configuration inconsistency replica command, before performing a manual failover or
DSC migration, to verify that the node in line to take over for the DSC or DSDRSC is in good shape. If
any problems are reported, use the clear configuration inconsistency replica command to correct them.
Task ID Task ID
config-services
Examples The following example shows a configuration with inconsistencies:
RP/0/RP0/CPU0:Router# show configuration inconsistency replica location 0/rp1/cpu0
The replica at location 0/RP1/CPU0 is inconsistent.
inconsistency replica location 0/RP1/CPU0'.
The following example shows sample output after the inconsistencies have been resolved:
RP/0/RP0/CPU0:Router# show configuration inconsistency replica location 0/rp1/cpu0
Cisco ASR 14000 Series Router System Management Command Reference
SMR-194
show configuration inconsistency replica location node-id
Displays any configuration inconsistencies on the designated node. The node-id
argument is expressed in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Configuration Management Commands on Cisco IOS XR Software
Please run 'clear configuration
OL-17231-01