Cisco ASR 14000 Series Management Command Reference page 247

File System Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show filesystem
To display the layout and contents of file systems, use the show filesystem command in EXEC or
administration EXEC mode.
Syntax Description
filesystem:
firmware
stats
verbose level
location node-id
location all
Defaults The file system for the active RP is displayed.
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show filesystem command to learn the alias names (prefixes) of the file systems supported by
your networking device.
Task ID Task ID
basic-services
Examples The following is sample output from the show filesystem command:
RP/0/RP0/CPU0:router# show filesystem
File Systems:
OL-17231-01
show filesystem filesystem: [firmware | stats | verbose level] [location node-id | location all]
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Name of the file system for which to display information, followed
by a colon. Possible values are: disk0:, disk1:, harddisk:,
compactflash:.
(Optional) Displays the firmware level.
(Optional) Displays device statistics.
(Optional) Changes the device driver verbose level.
(Optional) Displays the layout and contents of file systems on the
designated node. The node-id argument is entered in the
rack/slot/module notation.
(Optional) Displays the layout and contents of file systems on all
nodes.
Cisco ASR 14000 Series Router System Management Command Reference
show filesystem
SMR-245