Cisco ASR 14000 Series Management Command Reference page 311

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show platform
To display information and status for each node in the system, use the show platform command in
EXEC or administration EXEC mode.
Syntax Description
node-id
Defaults
Status and information are displayed for all nodes in the system.
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The show platform command provides a summary of the nodes in the system, including node type and
status.
Enter the show platform command in administration EXEC mode to display output for the entire
system. Enter the show platform command in EXEC mode to display output for only those nodes that
belong to the SDR on which the command is executed.
Task ID Task ID
system
root-system
Examples The following is sample output from the show platform command:
RP/0/RP0/CPU0:router# show platform
Node
-----------------------------------------------------------------------------
0/1/CPU0
0/1/0
0/1/5
0/6/CPU0
0/6/0
0/6/4
OL-17231-01
show platform [node-id]
(Optional) Specifies the node whose information you want to display. The
node-id argument is entered in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read (in EXEC mode)
read (in administration EXEC mode)
Type
MSC
MSC(SPA)
MSC(SPA)
MSC
MSC(SPA)
MSC(SPA)
PLIM State
Jacket Card IOS XR RUN
4XOC3-POS OK
8X1GE OK
Jacket Card IOS XR RUN
4XOC3-POS OK
8XOC3/OC12-POS OK
Cisco ASR 14000 Series Router System Management Command Reference
show platform
Config State
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
SMR-309