Cisco ASR 14000 Series Management Command Reference page 715

Terminal Services Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
stopbits
To set the stop bits used for physical terminal connections, use the stopbits command in line console
configuration mode. To restore the default, use the no form of this command.
Syntax Description
1
2
Defaults Two stop bits.
Command Modes
Line console configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the stopbits command to set the data bits attributes for physical terminal connections. Physical
terminal connections use either the console or auxiliary terminal templates.
Communication protocols provided by devices such as terminals and modems often require a specific
stop-bit setting.
Task ID Task ID
tty-access
Examples
The following example shows how to change the default from two stop bits to one for the console line
template:
RP/0/RP0/CPU0:router(config)# line console
RP/0/RP0/CPU0:router(config-line)# stopbits 1
Related Commands Command
databits
OL-17231-01
stopbits {1 | 2}
no stopbits
Specifies one stop bit.
Specifies two stop bits. This is the default.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Sets the number of data bits.
Cisco ASR 14000 Series Router System Management Command Reference
stopbits
SMR-713