Cisco ASR 14000 Series Management Command Reference page 111

Configuration Management Commands on Cisco IOS XR Software
clear configuration inconsistency replica
To resolve configuration inconsistencies on a replica node, use the clear configuration inconsistency
replica command in EXEC or administration EXEC mode.
Syntax Description
location node-id
detail
Defaults
Administration EXEC mode: Resolves any configuration inconsistencies for the admin plane
configuration.
EXEC mode: Resolves any configuration inconsistencies for a router configuration.
Command Modes
EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
In administration EXEC mode, the replica node for the clear configuration inconsistency replica
command is the standby designated system controller (DSC). In EXEC mode, the replica nodes are the
route processors (RPs) or distributed route processors (DRPs) that can become the designated secure
domain router system controller (DSDRSC).
Use the clear configuration inconsistency replica command if there is a configuration inconsistency
between the standby DSC and the current active DSC; or alternatively, if the configuration on any nodes
that could become the DSC is not the same as the configuration on the current DSC. To determine if you
have a configuration inconsistency, use the show configuration inconsistency replica command.
To clear configuration inconsistencies for the admin plane configuration, enter the clear configuration
inconsistency replica command in administration EXEC mode.
To clear configuration inconsistencies for an SDR configuration, enter the clear configuration
inconsistency replica command in EXEC mode for that SDR.
Task ID Task ID
config-services
OL-17231-01
clear configuration inconsistency replica location node-id [detail]
Resolves the configuration inconsistencies on the designated node. The
node-id argument is expressed in rack/slot/module notation.
(Optional) Displays details of the task's progress.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
execute
Cisco ASR 14000 Series Router System Management Command Reference
clear configuration inconsistency replica
SMR-109