Cisco ASR 14000 Series Management Command Reference page 589

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show snmp host
To display the configured Simple Network Management Protocol (SNMP) notification recipient host,
User Datagram Protocol (UDP) port number, user, and security model, use the show snmp host
command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults
No default behavior or values
Command Modes
EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
snmp
Examples The following is sample output from the show snmp host command:
RP/0/RP1/CPU0:Router(config)# show snmp host
Notification host: 10.50.32.170 udp-port: 2345 type: trap
user: userV3auth security model: v3 auth
Notification host: 10.50.32.170 udp-port: 2345 type: trap
user: userV3noauth security model: v3 noauth
Notification host: 10.50.32.170 udp-port: 2345 type: trap
user: userV3priv security model: v3 priv
Notification host: 10.50.32.170 udp-port: 2345 type: trap
user: userv2c security model: v2c
OL-17231-01
show snmp host
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Cisco ASR 14000 Series Router System Management Command Reference
show snmp host
SMR-587