Cisco ASR 14000 Series Management Command Reference page 661

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
SystemOwner
access-list-name
Defaults
By default, access is limited to agents on the owner SDR only.
See also
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Table 80
Table 80
Characteristic
passwords
access lists
SDR and System-wide Access
When the command snmp-server user is entered with the SDROwner keyword, SNMP access is
granted only to the MIB object instances in the owner SDR.
When the command snmp-server user is entered with the SystemOwner keyword, SNMP access is
granted to all SDRs in the system. Only one user can be configured with SystemOwner privileges.
In a non-owner SDR, user access is provided only to the object instances in that SDR, regardless of the
Note
access privilege assigned. Access to the owner SDR and system-wide access privileges are available only
from the owner SDR.
Task ID Task ID
snmp
Examples The following example shows how to enter a plain-text password for the string abcd for user2 in group2:
RP/0/RP0/CPU0:Router(config)# snmp-server user user2 group2 v3 auth md5 clear abcd
OL-17231-01
(Optional) Provides system-wide access to the agents for all SDRs.
(Optional) Specifies an access list to be associated with this SNMP user.
The list argument represents a value from 1 to 99, that is, the identifier of
the standard IP access list.
Table 80 in the "Usage Guidelines" section.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
describes default behaviors for passwords and access lists.
snmp-server user Default Descriptions
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
Default
Text strings are assumed.
Access from all IP access lists is permitted.
snmp-server user
SMR-659