Cisco ASR 14000 Series Management Command Reference page 291

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot config command to obtain diagnostic information about the
configuration of an interface on the SPA.
Task ID Task ID
root-lr
Examples The following is sample output for the show hw-module subslot config command:
RP/0/RP0/CPU0:router# show hw-module subslot 0/2/cpu0 config
BAY 0 config info:
-------------------
SPA inserted: YES
SPA cfg admin up: YES
SPA cfg power up: YES
BAY 1 config info:
-------------------
SPA inserted: YES
SPA cfg admin up: YES
SPA cfg power up: YES
Table 33
Table 33
Field
SPA inserted
SPA cfg admin up
SPA cfg power up
Related Commands Command
show controllers
OL-17231-01
Operations
read
describes the significant fields shown in the display.
show hw-module subslot config Field Descriptions
Description
Displays the controller type and other information.
Cisco ASR 14000 Series Router System Management Command Reference
Description
Indicates if a SPA is currently detected in the subslot.
Configured state of the SPA: YES—the SPA is not shut down,
NO—the SPA is shut down.
Indicates whether the subslot is currently configured as
powered or not.
show hw-module subslot config
SMR-289