Cisco ASR 14000 Series Management Command Reference page 706

Router system

Hide thumbs Also See for ASR 14000 Series:

Table of Contents

C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1

To display the parameters of terminal lines, use the show line command in EXEC mode.

Syntax Description

No default behavior or values

Command Modes

Command History

Release 3.7.1

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper

The following is sample output from the show line command. The asterisk (*) indicates the current

terminal session.

RP/0/RP0/CPU0:router# show line

Cisco ASR 14000 Series Router System Management Command Reference

show line [aux location node-id | console location node-id | vty number]

(Optional) Specifies the location for the route processor (RP) on which the auxiliary

or console port resides. The node-id argument is entered in the rack/slot/module

Displays the terminal line parameters for the auxiliary line.

Displays the terminal line parameters for the console line.

(Optional) Specifies a virtual terminal line (vty) number. Range is from 0 through 99.

Modification

This command was introduced on the Cisco ASR 14000 Series Router.

Terminal Services Commands on Cisco IOS XR Software

Noise Overruns

Table of Contents