Cisco ASR 14000 Series Management Command Reference page 357

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
install auto-abort-timer stop
To deactivate the auto-abort-timer that is set in the install activate or install deactivate commands, use
the install auto-abort-timer stop command in EXEC or administration EXEC mode.
Syntax Description
sdr OWNER
Defaults When activated, the auto-abort-timer runs to expiration and then loads the last committed loadpath.
Command Modes
EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the install auto-abort-timer stop command to halt the auto-abort-timer that was activated with the
install activate or install deactivate command. Alternatively, you can use the install commit command
to halt the timer.
If you do not halt the auto-abort-timer, the software loads to the last committed loadpath when the timer
expires. If the software has installed successfully, and you intend to continue using the new software,
you should disable the auto-abort-timer.
Command Modes
•
•
Task ID Task ID
pkg-mgmt
OL-17231-01
install auto-abort-timer stop [sdr OWNER]
(Optional. Administration EXEC mode only) Deactivates the
auto-abort-timer for a specific secure domain router (SDR). The only SDR
available is OWNER, which refers to the entire Cisco ASR 14000 Series
Router router.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Enter the install auto-abort-timer stop command in administration EXEC mode to halt the
auto-abort-timer for all secure domain routers (SDRs).
Enter the install auto-abort-timer stop command in EXEC mode to halt the auto-abort-timer
operations for the SDR to which you are logged in.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
install auto-abort-timer stop
SMR-355