Cisco ASR 14000 Series Management Command Reference page 355

Software Package Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
install attach
To attach a terminal to an installation operation, use the install attach command in EXEC or
administration EXEC configuration mode.
Syntax Description
request-id
asynchronous
synchronous
Defaults
The command operates in synchronous mode.
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the install attach command to attach a terminal to an installation operation. This is similar to
making the installation operation synchronous, and is used for the following reasons:
•
•
Note An asynchronous operation runs in the background, and the EXEC prompt is returned as soon as
possible. This is the default mode. A synchronous operation allows the installation process to finish
before the prompt is returned.
Task ID Task ID
pkg-mgmt
OL-17231-01
install attach [request-id] [asynchronous | synchronous]
(Optional) Request ID assigned to an installation operation.
(Optional) Performs the command in asynchronous mode. In asynchronous
mode, this command runs in the background, and the EXEC prompt is
returned as soon as possible. This is the default mode.
(Optional) Performs the command in synchronous mode. This mode allows
the installation process to finish before the prompt is returned.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
To change an asynchronous installation operation to a synchronous installation operation.
The installation operation is asynchronous but the terminal that ran the command has been lost (due
to a failover or terminal timeout).
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
install attach
SMR-353