Rep 1.6 Top/Rear Door Interlock Switch; Rep 1.7 Smps Fan - Xerox Phaser 4600 Service Manual

REP 1.6 Top/Rear Door Interlock Switch

Parts List on PL 28.15 Item 2
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP 28.3.
4. Remove the IP Board Cover, REP
5. Remove the Right Cover, REP 28.2.
6. Remove the Top Cover, REP 28.5.
7. Turn the cover over and release 4 hooks that secure the switches to the cover,
Figure 1 Remove the Interlock Switch
4 Repairs and Adjustments
REP 1.6, REP 1.7
WARNING
28.1.

REP 1.7 SMPS Fan

Parts List on PL 1.15 Item 6
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit,
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover,
4. Release 2 hooks that secure the SMPS Fan in the duct.
5. Disconnect P/J22 to remove the fan,
Figure 1.
04/2016
4-10
WARNING
REP 10.1.
REP 28.3.
Figure 1.
Figure 1 Remove the SMPS Fan
Phaser 4600/4620/4622 Printer Service Manual
Revised