Rep 4.3 Feed And Registration Clutches / Paper Feed Pwb; Rep 4.4 Transfer Roll - Xerox B210 Service Manual

REP 4.3 Feed and Registration Clutches / Paper Feed PWB

Parts List on PL 4.1
Removal
1. Switch off the machine, then disconnect the power cord.
2. Remove the Left Side Cover, REP
3. Remove the Paper Feed PWB. Figure
a. Disconnect three connectors on the Paper Feed PWB.
b. Remove the screw, then remove the Paper Feed PWB.
4. Remove the Feed Clutch, Figure 1:
a. Disconnect CN2 on the Paper Feed PWB.
b. Remove the E-ring and Washer from the Feed Clutch.
c. Remove the Feed Clutch.
5. Remove the Registration Clutch, Figure
a. Disconnect CN1 on the Paper Feed PWB.
b. Remove the E-ring and Washer from the Registration Clutch.
c. Remove the Registration Clutch.
CN1
Registration Clutch
Figure 1 Feed and Registration Clutches / Paper Feed PWB
Replacement
Replacement is the reverse of the removal procedure.
Initial Release
Xerox® B210 Service Manual
2.2.
1:
1:
Paper Feed PWB
Screw
Feed Clutch

REP 4.4 Transfer Roll

Parts List on PL 4.1
Removal
1. Open the Front Cover Door.
NOTE: Cover the Drum Cartridge with several sheets of paper to prevent it from being light
shocked.
2. Remove the Toner Cartridge and the Drum Cartridge.
3. Remove (squeeze and lift) the Transfer Roll Retainer Clip,
CN2
July 2019
4-15
Figure
Transfer Roll Clip
Figure 1 Transfer Roll Retainer Clip
REP 4.3, REP 4.4
1.
Repairs - Adjustments