Configure Pim Crp Timer - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

configure pim crp timer

configure pim crp timer <crp advertisement interval>
Description
Configures the candidate rendezvous point advertising interval for PIM sparse mode operation.
Syntax Description
crp advertisement interval Specifies a candidate rendezvous point advertising interval in seconds.
Default
The default is 60 seconds.
Usage Guidelines
None.
Example
The following command configures the candidate rendezvous point advertising interval to 120 seconds:
configure pim crp timer 120
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
1510 ExtremeWare Software 7.3.0 Command Reference Guide