IP Multicast Commands
configure pim crp timer
configure pim crp timer <crp advertisement interval>
Description
Configures the candidate rendezvous point advertising interval for PIM sparse mode operation.
Syntax Description
crp advertisement interval
Default
The default is 60 seconds.
Usage Guidelines
None.
Example
The following command configures the candidate rendezvous point advertising interval to 120 seconds:
configure pim crp timer 120
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
2036
Specifies a candidate rendezvous point advertising interval in seconds. The
valid range is 1 to 1717986918.
ExtremeWare 7.7 Command Reference Guide