Configure Pim Crp Timer - Extreme Networks ExtremeWare XOS Command Reference Manual

configure pim crp timer

configure pim crp timer <crp_adv_interval>
Description
Configures the candidate rendezvous point advertising interval in PIM sparse mode operation.
Syntax Description
crp_adv_interval
Default
The default is 60 seconds.
Usage Guidelines
Increasing this time will result in increased convergence time for CRP information to the PIM routers.
Example
The following command configures the candidate rendezvous point advertising interval to 120 seconds:
configure pim crp timer 120
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies a candidate rendezvous point advertising interval in seconds. The
range is 1 to 1,717,986,918.
configure pim crp timer
1547