Config Snmp Syslocation - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

config snmp sysLocation

config snmp syslocation <alphanumeric string>
Description
Configures the location of the switch.
Syntax Description
alphanumeric string Specifies the switch location.
Default
N/A.
Usage Guidelines
Use this command to indicate the location of the switch. A maximum of 255 characters is allowed.
To view the location of the switch on the switch, use the command. The
show switch show switch
command displays switch statistics including the location of the switch.
To restore defaults to all SNMP-related entries, including the SNMP parameters modified using the
command, use the
config snmp syslocation <alphanumeric string> unconfig management
command.
Example
The following command configures a switch location name on the system:
config snmp syslocation englab
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
108 ExtremeWare Software 7.0.0 Command Reference Guide