Configure Ospf Metric-Table - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure ospf metric-table

configure ospf metric-table 10M <cost_10m> 100M <cost_100m> 1G <cost_1g>
{10G <cost_10g>}
Description
Configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces, and optionally,
the 10 Gbps interface.
Syntax Description
cost
Default
10 Mbps—The default cost is 10.
●
100 Mbps—The default cost is 5.
●
1 Gbps—The default cost is 4.
●
10 Gbps—The default cost is 2.
●
Usage Guidelines
None.
Example
The following command configures the automatic interface costs for 10 Mbps,
100 Mbps, and 1 Gbps interfaces:
configure ospf metric-table 10m 20 100m 10 1g 2
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies the interface cost for the indicated interfaces.
configure ospf metric-table
1563