Configure Ospf Metric-Table - Extreme Networks ExtremeWare Command Reference Manual

configure ospf metric-table

configure ospf metric-table
configure ospf metric-table 10M <cost> 100M <cost> 1G <cost> {10G <cost>}
Description
Configures the automatic interface costs for 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps interfaces.
Syntax Description
cost Specifies the interface cost for the indicated interfaces.
Default
• 10 Mbps—The default cost is 10.
• 100 Mbps—The default cost is 5.
• 1 Gbps—The default cost is 4.
• 10 Gbps—The default cost is 2.
Usage Guidelines
None.
Example
The following command configures the automatic interface costs for 10 Mbps,
100 Mbps, and 1 Gbps interfaces:
configure ospf metric-table 10m 20 100m 10 1g 2
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide 1821