Config Ospf Metric-Table - Extreme Networks ExtremeWare Command Reference Manual

config ospf metric-table

config ospf metric-table
config ospf metric-table 10M <cost> 100M <cost> 1G <cost> {10G <cost>}
Description
Configures the automatic interface costs for 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps interfaces.
Syntax Description
cost Specifies the interface cost for the indicated interfaces.
Default
• 10 Mbps—The default cost is 10.
• 100 Mbps—The default cost is 5.
• 1 Gbps—The default cost is 4.
• 10 Gbps—The default cost is 2.
Usage Guidelines
None.
Example
The following command configures the automatic interface costs for 10 Mbps,
100 Mbps, and 1 Gbps interfaces:
config ospf metric-table 10m 20 100m 10 1g 2
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide 943