Configure Ospf Add Vlan Area - Extreme Networks ExtremeWare XOS Command Reference Manual

OSPF Commands

configure ospf add vlan area

configure ospf add vlan [<vlan-name> | all] area <area-identifier>
{passive}
Description
Enables OSPF on one or all VLANs (router interfaces).
Syntax Description
vlan-name
all
area-identifier
passive
Default
Disabled.
Usage Guidelines
None.
Example
The following command enables OSPF on a VLAN named accounting:
configure ospf add vlan accounting area 0.0.0.1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1290
Specifies a VLAN name.
Specifies all VLANs.
Specifies the area to which the VLAN is assigned.
Specifies to stop sending and receiving hello packets on this interface.
ExtremeWare XOS 11.3 Command Reference