Enable Icmp Redirects - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

enable icmp redirects

enable icmp redirects {vlan <vlan name>}

Enables generation of ICMP redirect messages on one or all VLANs.

Syntax Description

Specifies a VLAN name.

Usage Guidelines

This option only applies to the switch when the switch is not in routing mode.

The following command enables the generation of ICMP redirect messages on all VLANs:

enable icmp redirects

This command was available in ExtremeWare 2.0.

This command was modified in an ExtremeWare IP Technology Services Release based on

ExtremeWare v6.1.8b12 to support MPLS modules.

This command was added to the "e" series of switches in ExtremeWare 7.1e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.7 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.7