STP Commands
disable stpd
disable stpd {<spanning tree name>}
Description
Disables the Spanning Tree Protocol on a particular STPD or for all STPDs.
Syntax Description
spanning tree name
Specifies an STPD name on the switch.
Default
Disabled
Usage Guidelines
All VLANs belong to an STPD. If you do not want to run STP on a VLAN, you must add the VLAN to
an STPD that is disabled.
The
keyword is optional. You do not need to indicate an STPD name if you
spanning tree name
disable STP for all STPDs.
To enable or re-enable STP on a particular STPD or on all STPDs, use the
enable stpd {<spanning
command.
tree name>}
Example
The following command disables an STPD named purple_st:
disable stpd purple_st
History
This command was first available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches ExtremeWare 6.2a and ExtremeWare
7.1e.
Platform Availability
This command is available on all platforms.
1612
ExtremeWare 7.7 Command Reference Guide
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?